cnc plans for download

onel.se · **Joined:** Tue Aug 05, 2008 1:42 pm **Posts:** 24

You can view some images and download iges files of my cnc router version 2

I use motors 2+2 from http://motionking.com/
and gecko g540 from http://www.geckodrive.com/product.aspx?i=14469
It is difficult to say how much the machine costs. I payed for every part. I guess that you can make this machine for 2000 - 2500 dollars.
Payment details-stepper motors-

Amount: $215.25 USD

>24HS1442, $33.00/pcs, 2pcs ------------- $66.00
> >23HS8430, $25.00/pcs, 2pcs ------------- $50.00
> >Express Freight Charge --------------------- $89.00
> >PayPal Surcharge (5%)
---------------------$10.25
> >SUM -----------------------------------
$215.25

Attention! This machine is made with a highest precision in some factory in Sweden by my friend who is a very good cnc machinist. I will say that you can not get the same speed and quality if you make your cnc machine at home .
BR/Boris

pedrito53 · **Joined:** Fri Nov 20, 2009 2:53 pm **Posts:** 7

Bonjour,

Parler vous Français?

Je voudrais savoir si vous aviez commandez vos glissières et vos entrainement par billes ou si vous les avez fabriquez...

Si vous les avez achetez, pouvez vous me donner l'adresse du site ou du contact??

Je suis en train d'essayer de faire la même machine que vous et j'ai déjà commander les moteurs et le contrôleur mais je ne sais pas comment faire et ou trouver les entrainements.

Cordialement

onel.se · **Joined:** Tue Aug 05, 2008 1:42 pm **Posts:** 24

Hi! Only English language is allowed on this community .

You can see the seller on ebay:

http://stores.ebay.com/linearmotionbearings

pedrito53 · **Joined:** Fri Nov 20, 2009 2:53 pm **Posts:** 7

Thanks you for your speed answer...

I not good speak english but i have try to do best myself.

I want to know, what dimensions took you? That? (ballscrews RM1605-350/500mm RM2005-800mm+BK/BF+couplers) About 300$?

I don't want to make a mistake so I want to sure...

Thank you

onel.se · **Joined:** Tue Aug 05, 2008 1:42 pm **Posts:** 24

Hi! When you open 3d cad files - you will see some dimensions.

pedrito53 · **Joined:** Fri Nov 20, 2009 2:53 pm **Posts:** 7

Hello,
I would need the other information, concerning the connection of motors. How have you connect motors to the port DB9?? (What threads on which connections? And how have you connect your card G540?

Also, what software do you use on your computer?

Thank you

onel.se · **Joined:** Tue Aug 05, 2008 1:42 pm **Posts:** 24

Hi!

You can see cable connection manual on http://www.geckodrive.com/. I use free software based on Linux - EMC2 http://www.linuxcnc.org/

pedrito53 · **Joined:** Fri Nov 20, 2009 2:53 pm **Posts:** 7

Ok, thanks you. But i already to know this connection manual.

I want to see your connections... So, could you take photographies of your connections... I understand better...

Thanks a lot.

ulisedebe · **Joined:** Wed Dec 02, 2009 2:48 am **Posts:** 3

Hi, you need to wire negative of power supply to 12 and positive of your power supply to 11 on gecko 540, also you need to attach a E-stop switch to 10 on gecko and the other side of the switch to ground, if u dont have one just wire 10 to 12 on gecko.

pedrito53 · **Joined:** Fri Nov 20, 2009 2:53 pm **Posts:** 7

Thanks.

Where have you bought your Power supply?? I look at but i don't find a supply 50 VDC.

onel.se · **Joined:** Tue Aug 05, 2008 1:42 pm **Posts:** 24

http://cgi.ebay.com/48V-DC-7-3A-350W-Regulated-Switching-Power-Supply_W0QQitemZ250537055527QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item3a552c1527

pedrito53 · **Joined:** Fri Nov 20, 2009 2:53 pm **Posts:** 7

Thanks very much, it's perfectly!

Is 7,3A it sufficient??

Also, is it necessary to put a ball bearing at the level of the coupling or then only at the end of ballscrews?

Because, on your version 1, I have the impression that you put it while on the version 2, I don't think.

So, I would like to know.

Thanks

dchobby · **Joined:** Fri Dec 11, 2009 9:31 pm **Posts:** 1

Hello.

Nice work, have a question.

I see you use 4 motors, do you use a 4 axis driver or run two motors from one driver, using a 3 axis setup?

Thanks Roy

onel.se · **Joined:** Tue Aug 05, 2008 1:42 pm **Posts:** 24

Hi!
I use gecko g540 four axes driver.

Raoul · **Joined:** Mon Dec 14, 2009 4:05 pm **Posts:** 1

Hello, I write from Italy, many compliments for your cnc, you have made a greatful work and I would like to realize this project but I have a problem, I can't get the measures of the pieces with the program I use, can you give me a name of program that read the .igs files and show me also the measures I need?
I hope you understand my "italian english" :)
regards
Raoul

imaginawireless · **Joined:** Sat Dec 19, 2009 6:52 pm **Posts:** 1

Hello. You can say to me where I could be bought all the together pieces, in a same package. Thanks

onel.se · **Joined:** Tue Aug 05, 2008 1:42 pm **Posts:** 24

Hi!
You can buy motors ,ball screws,spindel motor or driver only.
You can not buy other parts of this cnc router. This is cnc router I made in some factory in Sweden according my cnc plans I wrote in
my 3d CAD program.

ranju · **Joined:** Mon Feb 15, 2010 10:07 am **Posts:** 2

Hey buddy,

Do you have the dxf files for your V2. I don't have a CNC machine and I have to make the parts in manual lathe. I'm looking for detail measurement for the parts.

Appreciate your help.

Regards

onel.se · **Joined:** Tue Aug 05, 2008 1:42 pm **Posts:** 24

Hi!

I have not any dxf file of cnc version 2.
You have to do it by your self according 3d files.

ranju · **Joined:** Mon Feb 15, 2010 10:07 am **Posts:** 2

just one more question...

do you sell this machine or parts anywhere? I'm interested to buy.

CNC PLANS

cnc plans for download

Who is online